36mm Vintage 369 Automatic Field Watch – NH35

A newly built 36mm automatic field watch with compact vintage-style proportions, an individually aged matte-black 3-6-9 dial and a clean no-logo design. Warm vintage-tone lume, a weathered stainless-steel case and an aged three-link bracelet give the watch the appearance of a well-worn field instrument while retaining modern mechanical construction.

The black dial features large Arabic numerals at 3, 6 and 9 o’clock, a triangle marker at 12, baton hour markers and a clear outer minute track. The dial, hands, case and bracelet are aged individually, so the tone and distribution of the patina, surface marks and weathered finish will vary slightly between watches. These variations are intentional. The watch is new, not antique, pre-owned or refurbished.

Its 316L stainless-steel case measures 36mm excluding the crown, 12.8mm thick and 45.2mm from lug to lug. The 20mm lug width allows the supplied aged steel bracelet to be replaced with a compatible leather, canvas or NATO-style strap. A mineral glass crystal protects the dial, while the screw-down crown helps secure the case after winding or setting the time.

The watch is powered by a Time Module Inc. TMI NH35 automatic mechanical movement. It winds through wrist movement and can also be wound manually through the crown. The movement runs at 21,600 vibrations per hour, uses 24 jewels and provides hacking seconds for more precise time setting. Approximate power reserve is 41 hours when fully wound. The dial displays hours, minutes and seconds without a visible date display.

Key specifications:

• Watch type: Vintage-style automatic field watch

• Condition: New with an intentionally aged finish

• Case diameter: 36mm excluding crown

• Case thickness: 12.8mm

• Lug-to-lug: 45.2mm

• Lug width: 20mm

• Case material: 316L stainless steel

• Dial: Individually aged matte-black 3-6-9 dial

• Dial branding: No logo

• Lume: Warm vintage tone

• Crystal: Mineral glass

• Crown: Screw-down

• Bracelet: Aged three-link stainless steel

• Movement: TMI NH35 automatic mechanical

• Jewels: 24

• Frequency: 21,600 vibrations per hour / 3 Hz

• Functions: Hours, minutes and seconds

• Hacking and hand-winding: Yes

• Power reserve: Approximately 41 hours

Each finished watch is checked on a timing machine in three positions before dispatch. The workshop acceptance targets are a measured rate within ±15 seconds per day, amplitude above 220 degrees and beat error below 0.6 milliseconds. These measurements are acceptance checks rather than a guarantee of the exact daily rate on the wrist, which can vary with position, temperature, power reserve, magnetism and wearing habits.

Every completed watch is individually water-resistance tested after final assembly to 20 ATM, equivalent to 200 metres of static pressure.

This rating should not be interpreted as a recommendation to dive to a depth of 200 metres. Our watches are not represented as ISO 6425-certified professional diving instruments and are not recommended for deep or professional diving.

Always keep the screw-down crown fully secured around water and never operate it while the watch is wet or submerged. Water resistance is not permanent, so periodic pressure testing is recommended, particularly after servicing or a strong impact.